2-Channel Control Box

Self contained spindle, coolant, dust collector, vacuum pump, etc.control box.

- Each outlet is rated for up to 220V/10 amps with a total of 10 amps for both.
- Separate signals are used to control the relays .
- Relays are magnetic to permit inductive surge loads at motor startup.
- Main power switch with lamp.
- Separate indicator lamps for each circuit.
- Can be used with any parallel port CNC controllers.
- 12V working voltage on board.
- Designed for control of CNC routers with spindles such as the 220V Kress.

To operate the relays with DeskCNC, the e.g. CW or Flood buttons are clicked in the DeskCNC software. Clicking the buttons again will turn off either circuit.

To control the circuits within a program, M03 turns on e.g. the spindle, M08 turns on the flood coolant circuit. M05 is spindle off and M09 is coolant off. Both circuits are turned off at the end of a program. All M codes can also be executed with the MDI function.

Content of delivery:

- Assembled and tested 2-channel control box in a black PVC housing,
- 1.8m DeskCNC data cable, power cord,
- Plug compatible, panel mount wiring assembly for the DeskCNC controller,
- Manual.