3D Tastscanner Scan100

Both a Contact Probe and a Tool Setter.

With the Scan100 and DeskCNC machine controller, you can scan 3D surfaces and create machinable, 3D .Stl files.

Scan with small probe to capture small detail, use the DeskCNC STL machining CAM to Rough and finish with different sized tools.

NO NEED TO SCAN AND CUT WITH THE SAME SIZE TOOL.

- Probe is 5 way triggered and has a long-wearing 2 mm diameter, ruby tip.
- Rated for 20,000 points per hour with DeskCNC software.
- Easy to convert from contact probe to tool setter (optional).
- Automatic tool length measurement and setting.
- Interchangeable Stylus, additional tips and extensions available.
- The Probe needs a 10mm shank for use in desktop mills.
- Works with other Controllers that have probe input capabilities.
- 1.8m shielded cable included.

Certificate of accuracy included:
- Roundness less than 0.025mm error
- Diameter less than 0.025mm error
- Repeatability deviation less than 0.025mm


Delivery content:

- all hardware needed for contact probing, 2mm tip, maintenance instructions.


Optional:

- Set to convert from contact probe to tool setter.